Pellet Stove Furnace
Pellet stoves can be used as a supplemental heating source or, with proper venting, a primary heating option. They can be purchased as freestanding units or as fireplace inserts that can give your home the look of an old-fashioned wood-burning fireplace.
The auger carries pellets from the hopper into the combustion chamber, where they are ignited and generate heat. Sensors monitor the flame and can adjust the rate of operation in order to maintain the desired temperature of the room.
1. Energy Efficiency
Pellet stoves make use of a renewable, non-toxic fuel that is made from compressed sawdust and other substances. They are typically disposed of in landfills, but can also be used to create a clean, efficient source of heat. As a result, they can help homeowners reduce their energy consumption and reduce greenhouse gas emissions. Many homeowners who own pellet stoves report recouping their initial investment in only a few years, thanks to lower heating costs.
similar website are much more dense and compressed than natural wood, making them more efficient for burning. They also produce less creosote than traditional wood-burning fires. They are also packaged in plastic bags that block out moisture and require less frequent cleaning.
Like other heating systems pellet stoves must be properly sized and vented. A professional technician can evaluate your venting needs and space requirements to achieve the best results.
During installation, the hearth is constructed to the right size, and the vent is fitted through a pre-cut hole in your home's siding. The vent may be installed through a sidewall or roof depending on your preference and the local laws.
After the vent and hearth are completed, the pellet stove may be connected. Some manufacturers provide remote controls that make starting and maintaining the fire easy and others include sensors that monitor combustion, airflow, flue temperature, and pressure. When the system detects that it requires more or less pellets, it tells the auger to accelerate or slow down in line with the need.
All stoves come with a hopper which can accommodate between 35 and 130 pounds of pellets. Hopper capacities determine the frequency at which the stove has refills with more hoppers, allowing for longer periods between refills. A grille pulls fresh air from the room and then passes it through a heat exchanger, which then blasts heated air into the living area by convection. A grate or an auger distributes the pellets, and a pan underneath is used to collect any burned ones along with combustion residue.
Pellet stoves are more efficient in energy use than wood-burning stoves, but they are not as efficient as electric heaters or natural gas furnaces. Electric components that drive motorized components of stoves require a power source. This could pose an issue in the event of power outage, but backup systems like batteries and generators are available.
2. Low Maintenance
Pellet stoves are incredibly efficient, however, like any major heating appliance they require a bit of maintenance to ensure that they function properly. Cleaning your stove and exhaust vent regularly will prevent the buildup of harmful creosote. This can cause a fire or explosion that can damage the stove and/or your home.
A pellet stove is made up of natural particles that are compressed (such as nutshells, kernels of corn, or small pieces of scrapwood) made from wood or other materials. The pellets are inserted into the combustion chamber by an auger that is powered by electricity. The rate at which the pellets are fed to the burner is controlled by the thermostat you set. The fire can be kept burning, or it can be decreased or even extinguished depending on the temperature you set. When the fire is out the ash is then thrown into an empty ash tray underneath the burner, which can be easily removed and disposed of.
Pellets are made from the waste products of lumber processing that would otherwise be discarded. They are a renewable resource and emit significantly less particles into the air than traditional wood-burning stoves, making them a cleaner burning heat source. The amount of carbon monoxide, carcinogens and other harmful chemicals released from pellet stoves is less than the latest EPA certified wood stoves.
These stoves aren't required to be vented via a chimney, as is the case with traditional wood stoves. Instead, they must be vented properly through a wall or another exterior structure. Pellet stoves come with flue ports at the top or rear of the appliance. They are connected to a ventpipe that extends out from the house.
A pellet stove comes with one drawback that you must purchase or store enough fuel pellets to last the entire winter season. Pellet stove owners typically use three tons of wood pellets each winter, for a price of $200 per ton. The costs can add up but they're cheaper than purchasing firewood and hauling it for a wood-burning stove or fireplace. Make sure that you purchase enough pellets to ensure that your stove will work throughout the coldest winter months and that you have the right space to store the pellets (preferably cool, dry and away from the ground).
3. Reduce carbon footprint
Pellet stoves produce heat using renewable biomass fuel, reducing the need for finite fossil fuels. This contributes to a reduced carbon footprint as well as helping diversify the energy sources used in homes.
Even the most modern woodstoves that are EPA certified emit significantly less carbon dioxide than pellet stoves. Emissions from pellet stoves are also lower than those from gas furnaces. Pellets can be made from sawdust, bark, and other wood remnants. They can also include soybeans, corn or other agricultural waste. When they are burned, they release less particles, which can cause respiratory problems and allergies and carcinogens as well as nitrous dioxide.
The major difference between wood stoves and pellet stove is the feed system. Pellet stoves have hoppers that hold the pellets. When the thermostat or sensors signal that the room requires heating, the auger turns. The pellets are then placed in the combustion chamber and burn to generate heat. The combustion chamber's air is pumped through a heat exchanger that transfers heat to the blower. This process results in very low emissions and no creosote buildup.
After the hopper has been empty, a cyclone removes the ash and deposits it in an ash pot. The stove is fitted with a fan that circulates the heated, clean air into the room. The majority of pellet stoves require little maintenance and feature a large viewing space for you and your family to relax and enjoy the flames.
The main factor that influences emissions from stoves made of pellets is the quality of the pellets. Pellets that are not of the highest quality produce more emissions. When choosing your pellets ensure that they are certified to meet certain standards and don't contain other ingredients such as petroleum products or urea. Look for a company that has a guarantee and will repair or replace parts in the event of a malfunction. If you're looking to take the greener route Some states permit homeowners to claim a tax credit for installing pellet stoves. This is a great option to help offset the initial cost of this kind of stove and makes installation more affordable.
4. Reduced Noise
Pellet stoves emit very little smoke or exhaust when compared to fireplaces that burn wood. A fan is employed to spread heat more evenly across the room. This feature is one reason why pellet stoves require less maintenance than wood stoves. While wood stoves have to be cleaned regularly of particulates and chemicals pellet stoves require the use of a special metal vacuum cleaner for regular cleaning.
Many manufacturers have made an effort to design their stoves to be simple to set up and operate as well as maintain. They come in different styles to are designed to match the decor of your home. Some models include WIFI, a remote control and thermostat that can be programmed.
The majority of pellet stoves come with an enormous fuel hopper, which can hold between 35 and 130 pounds of pellets. The pellets are then pumped to the combustion chamber through an auger. The amount of heat produced and how hot the fire gets depends on the speed at which pellets are fed to the burner. The hopper may be filled with hardwood pellets composed of dense wood species such as oak and hickory or softwood pellets. A lot of stoves can burn biomass pellets made from switchgrass and corn. This is an environmentally friendly alternative.
Pellet stoves emit less smoke and require less maintenance due to the fact that they use a more clean fuel than fireplaces that burn wood. They also do not require a chimney, which makes them a better option for new construction or retrofits.
Pellet stoves don't require regular cleaning of creosote or other chemicals similar to wood stoves. They just require periodic inspections to ensure the proper operation and maintenance. This may include regular cleaning and inspection of the ash or "clinker" as well as the motors and fans according to the model. Your appliance dealer can explain the proper procedures for your specific model and brand. They can also provide details regarding safety and storage, and assist you in locating the appropriate fuel for your stove.